Cart

Close
Call Us
 0
Big Boys Garage Toys
Shop all 2-Post Lifts
Challenger

Challenger - SA10

$2,900.00

Q & A
Description

SA10 Two Post Vehicle Lift

Challenger Lifts’ SA10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop. The SA10 features 3-stage front arms that provide maximum extension and retraction ensuring safe and reliable lifting on all vehicles within rated capacity.

With adjustable height and width options, double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the SA10 will accommodate the rigorous demands of a full service facility. Available in red and blue.

Our two post lifts come with accessories to turn your two post vehicle lift into a complete productivity center. All Challenger two post lifts are designed and manufactured to the highest standards for performance, durability and longevity.

Specifications
Model Number
SA10

Lift Configuration

Symmetric Configuration
Asymmetric Configuration

Lift Capacity*

10,000 lbs. (4536kg)
A Rise Height1
74-7/8" (1892mm)
B Overall Height
11' 4-1/2" / 11' 10-1/2" (3467mm / 3620mm)
C Overall Height (Cylinder Extended)
11' 10-1/2" (3620mm)
- with SA10EH2 2' height extension
13' 4-1/2" / 13' 10-1/2"(4077 / 4230mm)
D Overall Base Width
10' 9" / 11' 3" (2356mm / 2508mm)
10' 11-1/2" / 11' 5-1/2" (3340mm / 3493mm)
E Drive-Thru Clearance
92-3/4" / 98-3/4" (2356mm / 2508mm)
88-1/2" / 94-1/2" (2248mm / 2400mm)
F Floor to Overhead Swith
131-1/8" / 137-1/8" (3331mm / 2483mm)
G Short Arm Reach
22-3/8" - 41-1/2" (3331mm - 1054mm)
H Long Arm Reach2 (min/max)
38-1/4" - 59" (972mm - 1499mm)
I Screw Pad Height
4-5/8" - 6-7/8" (111mm - 165mm)
J Inside of Columns
106-3/4" / 112-3/4" (2711mm - 2864mm)
101-1/2" / 107-1/2" (2578mm - 2731mm)
Motor
2HP, Single Phase, 60Hz
Voltage
208v - 230v
Speed of Rise
48 seconds
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
12 (3658mm)

*Lift capacity ratings are based on loads equally distributed on all four arms. 1 Rise Height is measured with telescoping screw pads in highest position. 2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm) 3 Overall width of Asymmetric lift is 11' 3"' / 11' 9" including power unit
† Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction

PDF Downloads

Floor Plan

Shipping

If you do not have a loading dock, unloading the car lift will require a forklift. You can choose to have the lift shipped to a local terminal, residence, or commercial address.

  • PICK-UP AT TERMINAL: If you do not have the means to unload the lift from a freight truck you can pick it up at a local terminal. The freight company will load the lift onto your trailer so you can transport and unload the trailer at your convenience.
  • RESIDENTIAL DELIVERY: You will need a method to unload the lift from a freight truck.
  • COMMERCIAL DELIVERY: You will need a method to unload the lift from a freight truck.
  • PLEASE CALL IF YOU HAVE QUESTIONS ABOUT DELIVERY

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

Welcome to the new BBGT!

Join our mailing list to receive the latest news and discount offers.

Cart

Subtotal: $0.00

Your cart is currently empty.