Cart

Close
Call Us
 0
Big Boys Garage Toys
BendPak

BendPak - HD-9AE

$4,010.00 $4,795.00 You save: $785.00

Q & A
Description

9,000 Lb. Capacity / Alignment / Includes Turnplates and Slip Plates

The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.

  • Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
  • Dual radius plate positions for better vehicle accommodation.
  • Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
  • Dual-hub cable sheaves reduce stress, fatigue and wear.
  • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
  • The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
  • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
  • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
  • Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
  • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
  • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
  • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
  • Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
  • A maintenance-free electric hydraulic power system assures ultimate dependability.
  • All operator controls are conveniently located within easy reach.
  • Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

    Specifications
    • 9,000-lb. maximum lifting capacity
    • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
    • Multi-caster slip plates
    • Dual radius plate positions
    • heavy-duty stainless steel lifting cables
    • Dual-hub cable sheaves
    • Grease nipples on every sheave and sheave axle
    • Single hydraulic cylinder
    • Integrated hydraulic flow restrictor
    • Durable powser coat finish
    • Spring-loaded safety locks
    • Simple push-button lock release
    • Aircraft-quality stainless steel and aluminum pneumatic cylinders
    • Secondary lock system
    • Fully enclosed cables, airlines, safety latches and sheaves
    • Multiple adjustable height locking positions
    • Maintenance-free power system
    • Easy-to-reach operator controls
    • Non-skid runways
    • Overall width: 127" / 3,226 mm
    • Outside length: 198" / 5,029 mm
    • Overall length: 224" / 5,690 mm
    • Height of columns: 88" / 2,235 mm
    • Runway min height: 6-1/2" / 165 mm
    • Max rise: 70" / 1,778 mm
    • Max lifting height: 76-1/2" / 1,943 mm
    • Width between posts: 117" / 2,972 mm
    • Runway width: 19" / 483 mm
    • Width between runways: 40" / 1,016
    • Length of runways: 188" / 4,775 mm
    • Min. wheelbase @ rated capacity: 135" / 3,429 mm
    • Min. wheelbase @ 75% capacity: 115" / 2,921 mm
    • Min. wheelbase @ 50% capacity: 95" / 2,413 mm
    • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
    • Locking positions: 12
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 60 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

    PDF Downloads

    Floor Plan

    5-2-1 Warranty

    Shipping
    If you do not have a loading dock, unloading the car lift will require a forklift. You can choose to have the lift shipped to a local terminal, residence, or commercial address.
    • PICK-UP AT TERMINAL: If you do not have the means to unload the lift from a freight truck you can pick it up at a local terminal. The freight company will load the lift onto your trailer so you can transport and unload the trailer at your convenience.
    • RESIDENTIAL DELIVERY: You will need a method to unload the lift from a freight truck.
    • COMMERCIAL DELIVERY: You will need a method to unload the lift from a freight truck.
    • PLEASE CALL IF YOU HAVE QUESTIONS ABOUT DELIVERY

    Customer Reviews

    Based on 1 review Write a review

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Welcome to the new BBGT!

    Join our mailing list to receive the latest news and discount offers.

    Cart

    Subtotal: $0.00

    Your cart is currently empty.