Cart

Close
Call Us
 0
Big Boys Garage Toys
BendPak

BendPak - XPR-10S

$2,920.00 $3,490.00 You save: $570.00

Q & A

Description

10,000 Lb. Capacity / Clearfloor / Adjustable Width / Screw Pads / ALI Certified

Clearfloor Versatility – Rugged Dependability

This BendPak® 2-Post Lift delivers a fast lift speed and less maintenance for improved efficiency and productivity. Plus, the expandable top beam accommodates wide or narrow configurations. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak XPR two post models feature dual "direct-drive" low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configuration for increased arm positioning versatility. ETL certified.

The XP-10S features double-telescoping screw pads with gouge and tear resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63mm stacking adapters are also included as standard accessories.

Our XP-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XP-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low pressure cylinders, maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configuration for increase arm positioning versatility.

The entire XP-Series is a reflection of BendPak's continuing commitment to producing lifts of only the highest quality, maximum safety and utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to safety standards well above normal OSHA/ALI/ETL requirements. The XP-Series lifts include a wealth of standard and optional features to support the operator's need for performance and security. Combined with BendPak's tradition of durable, reliable construction, the XP-Series has become the new industry benchmark that others are sure to follow.

Whatever your requirements, there's a BendPak XP-Series -Post lift designed to meet your needs. The XP-Series offers an abundant roster of options and accessories that allows you to fully tailor your lift to your unique circumstance. But long before you start looking at options, you'll be impressed with the long list of standard features and capabilities packed into every BendPak XP-Series lift.

Bottom line—when you buy BendPak, you can expect a significant boost in performance and life expectancy. In fact, your BendPak XP-10S might be the last lift you ever purchase. No one surpasses us in quality and safety. Not now, not ever. When you get a BendPak, you get more than just a fantastic lift. You get peace of mind. That's the BendPak benefit.

Getting the right lift for your application is easy with the help of your local BendPak dealer or by investigating the customer focused product materials found on our website.

Clearfloor convenience

Our clearfloor models provide unobstructed floor space allowing technicians to easily move toolboxes, transmission jacks, oil drains and other equipment underneath the elevated vehicle.

Triple-telescoping front arms and two-stage rear arms

Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM recommended pic-up points and wide and / or narrow wheelbase configurations.

Optional column extension

Gives you the flexibility of increasing the overhead clearance to maximize the vehicles you can service.

Lo-profile, dropped-end frame contact pads

Squeeze under even the lowest compact and sport vehicles.

Included truck and van adapters

Others might charge extra for these necessary adapters, but they're standard with every XP-Series lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks. 

Lowered arm tube supports

To minimize the chance of damaging vehicles with lo-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance. 

Automatic arm restraints

Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms. 

Taller lift carriages

Take a close look at our lift carriages (the lifting assembly that the arms are attached to) and then take a look at the competition. You'll notice our 53" tall carriages are considerably taller than most, which minimizes the stress placed on the load bearings and columns. 

Maintenance-free load bearings

Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.

We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Dual direct-drive technology

By utilizing two, low-pressure HVLP direct-drive cylinders, we've eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP direct-drive technology offers better reliability, smoother operation and less maintenance. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.

Single-point safety release
The single point safety release and "dead man" style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.

On the level
Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition. Auto shutoff
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure. Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. High-speed hydraulics
Free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity. Durable powder-coat finish
All XPR-Series lifts feature a powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed.Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores
of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next,
the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is
finally applied using an electrostatic spray gun. The
powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven
and baked at 400° F for 45 minutes.

BendPak's 5-2-1 Warranty

  • Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
  • Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
  • One Year (12-Months) Labor Warranty on site or at factory

Specifications

    • Single-piece columns with safety locks and padded overhead safety shutoff bar
    • Drop-end arms provide a lower pad height
    • Oversized 53in. tall carriage offers superior strength and durability
    • Dual hydraulic direct-drive cylinders
    • Reliable electric/hydraulic power system
    • Large, 17in. x 19in. steel base plate
    • Single-point safety release and automatic arm restraints
    • Heavy-duty 1/2in. aircraft-quality equalizer cables
    • Oversized cable sheave diameter reduces cable fatigue
    • Double-telescoping screw pads with gouge- and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs
    • ETL certified
    • Item too large for lift gate, requires forklift for unloading
      • 10,000‐lb lifting capacity
      • Expandable top beam accommodates wide or narrow drive‐thru configuration
      • Double‐telescoping screw pads offer increased versatility
      • Padded overhead safety shutoff bar
      • Telescoping arm design for more versatile arm positioning
      • Single‐piece columns
      • Single‐point safety release
      • Drop‐end arms provide a lower pad height
      • Dual hydraulic direct‐drive cylinders
      • Oversized 53" tall carriage for superior strength and durability
      • Electric / hydraulic power system
      • Large, 17" x 19" A36 steel base plate
      • Self‐lubricating dura‐glide UHMW polyethylene bearing system
      • Safety locks in each column spaced every 3"
      • Automatic arm restraints
      • Heavy‐duty 1/2" aircraft‐quality equalizer cables
      • Oversized cable sheave diameter reduces cable fatigue
      • 4‐piece 63mm stackable adapter set comes standard
      • Triple‐telescoping front arms
      • ALI Approved.

    MODEL XPR-10S

    Lifting Capacity* 10,000 Lbs. / 4,536 kg.

    *Max Capacity / Front Axle 5,000 Lbs. / 2,268 kg.

    *Max Capacity / Rear Axle 5,000 Lbs. / 2,268 kg.

    A - Height Overall: 145" / 3,683 mm*

    B - Width Overall: (NARROW) 132" / 3,353 mm.

    B - Width Overall: (WIDE) 145" / 3,683 mm.

    C - Width Outside of Columns: (NARROW) 126-3/4" / 3,225 mm.

    C - Width Outside of Columns: (WIDE) 139-3/4" / 3,555 mm.

    D - Floor To Overhead Switch: 141" / 3,581 mm*

    E - Inside Columns: (NARROW) 105.5" / 2,680 mm.

    E - Inside Columns: (WIDE) 118.5" / 3,010 mm.

    F - Reach (Front Arm Min.): 27-1/2" / 698 mm.

    G - Reach (Front Arm Max.): 51-1/2" / 1,308 mm.

    H - Reach (Rear Arm Min.): 34" / 863 mm.

    I - Reach (Rear Arm Max.): 54-1/2" / 1,384 mm.

    J - Min. Pad Height: 4.25" - 6-3/4” / 108 mm. - 171 mm.

    K - Rise: 69" / 1,753 mm.

    L - Max Lift Height (Pad Only): 73" - 75" / 1,854 - 1,905 mm.

    M - Max Lift Height (3" Adapter): 75.5" - 77.5" / 1,917 mm. - 1,968 mm.

    N - Drive-Thru Clearance: (NARROW) 93" / 2,362 mm.

    N - Drive-Thru Clearance: (WIDE) 106" / 2,692 mm.

    Screw Pad Adjustment: 2" / 51 mm.

    Motor (**) 220 VAC / 60 Hz. 1Ph.

    Time of full Rise: 45 Seconds

    Max Load Per Arm: 2,500 Lbs. / 1134 Kg.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.


      Key Specs

      Item# 21637
      Manufacturer's Warranty 12 months parts / 12 months labor
      Ship Weight 1654.0 lbs
      Lift Capacity (lbs.) 10,000
      Max. Rise (in.) 69
      Pad Height (in.) 4
      Drive-Thru Clearance (in.) Narrow configuration: 93; Wide configuration: 106
      Overall Height (in.) 145
      Overall Width (in.) 132–145
      HP 2
      Motor Phase(s) 1
      Time of Full Rise (seconds) 45
      Volts 220

       

      PDF Downloads

      Floor Plan

      5-2-1 Warranty

      Direct Drive

      Shipping

      If you do not have a loading dock, unloading the car lift will require a forklift. You can choose to have the lift shipped to a local terminal, residence, or commercial address.

      • PICK-UP AT TERMINAL: If you do not have the means to unload the lift from a freight truck you can pick it up at a local terminal. The freight company will load the lift onto your trailer so you can transport and unload the trailer at your convenience.
      • RESIDENTIAL DELIVERY: You will need a method to unload the lift from a freight truck.
      • COMMERCIAL DELIVERY: You will need a method to unload the lift from a freight truck.
      • PLEASE CALL IF YOU HAVE QUESTIONS ABOUT DELIVERY

      Questions & Answers

      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Welcome to the new BBGT!

      Join our mailing list to receive the latest news and discount offers.

      Cart

      Subtotal: $0.00

      Your cart is currently empty.